You are here: Home > Spokes
Straight Butted Bladed
Pillar Sapim Wheelsmith
Spoke Prep
Sort By:
Page of 2
Custom Spoke Lengths Sapim Leader - JBend - SILVER Wheelsmith DB14 - SILVER
Pillar PDB1415 - Jbend - Silver Leader - BLACK Pillar PBD1415 - Jbend - Black
Leader - BLACK
Price: $0.75
Pillar PDB1416 - JBend - Black Race - SILVER Sapim Strong - JBend - SILVER
Pillar PDB1416 - JBend - Black
Price: $1.10
Your Price
: $0.80
Price: $0.80
Race - BLACK Pillar PDB1416 - JBend - Silver Strong - BLACK
Race - BLACK
Price: $1.00
Strong - BLACK
Price: $1.00

Sapim's most popular double-butted racing spoke - 2.0 - 1.8 - 2.0.

Laser - SILVER Sapim Force - JBend - BLACK D-Light - BLACK
Laser - SILVER
Price: $1.20
D-Light - BLACK
Price: $1.50

Sapim's Triple-Butted spoke (2.2 - 1.8 - 2.0)
Sapim's lightweight spoke for disc wheels.
Sapim Laser - JBend - Black Sapim Laser - Straight Pull - BLACK Pillar PSR1422 Bladed - JBend - Black
Sapim's lightest double-butted round spoke - only 4.5 grams. 2.0 - .1.5 - 2.0.
Wing 1420 - BLACK Pillar WING - SP - BLACK CX-Sprint - BLACK
Wing 1420 - BLACK
Price: $2.80
CX-Sprint - BLACK
Price: $3.00
CX-Sprint - Straight Pull - BLACK CX-Ray - Silver Sapim CX-Ray - Straight Pull - Silver
CX-Ray - Silver
Price: $3.45
Sapim's lightweight, bladed racing spoke.
Sapim CX-Ray - JBend - BLACK Sapim CX-Ray - Straight Pull - Black Pillar PST14 Titanium Spoke

Sapim's lightweight, bladed spoke.

The CX-Ray still receives the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mold to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility.
PSR1422 - RAINBOW MegaLite SS - BLACK Sapim Super Spoke - Round - Black
Price: $4.50

The lightest steel spoke ever made. The Super Spoke has been developed for extra light wheels. A new grade of stainless steel enables Sapim to reduce the diameter of the spoke, whilst increasing its strength and fatigue resistance.

Technical specs

Weight: (64 pcs x 260 mm lg) 231 g
Quality: Special stainless steel
Strength on middle section: 2900 N/mm2


Length: 160 - 305 mm
Diameter: 1.8 - 1.4 - 1.8 mm


  • Rod (without bend) or different bend
  • Black chromed
  • Oval head
  • 2-sides threading

Installation instruction for Super Spoke


The Super Spoke is a tuning-part of your bike. Please read carefully the following recommendations when using it.


Because the elasticity of the Super Spoke is high, please use a length that is 1 mm shorter than that provided by the spoke calculator or suggested by your experience.

Spoke tension

The recommended spoke-tension to build a stiff wheel-set with the Super Spoke is:

  • Front wheel: at least 950N
  • Rear wheel: at least 750N (opposite of the sprocket wheel)

As you probably already know, a high tension is always better. The higher the tension the stiffer the wheel. Please make sure that you respect also the requirements provided by your rim-manufacturer and do not forget that the tension of each wheel-side should be equal.


Use only aluminum nipples from Sapim. They will reduce the friction on the thread thanks to the Sapim’s special coating that reduces the torsion on the spoke.

Custom components

Before assemble the spokes please check if the hub-flange and the spoke-holes are suited for the spoke flexure. Little spoke-holes up to 2.3mm are preferred. Please avoid inflexions between nipples and spokes.