You are here: Home > Rear Road Hubs
Sort By:
Page of 2
SL211 SuperLight Rear Hub - 206 Grams - CLOSEOUT - $69.95 SL210 SuperLight Rear Hub UL190 UltraLight Rear Hub - 190 Grams
Our Price: $78.95
Our Price: $89.95
Weight206g
Length130mm
BearingsFour sealed Enduro bearings (3 x 6802, 1 x 6902)
Pawls6
Driveside PCD49.3mm
Non-Driveside PCD38.4mm
NDS Flange-to-Center37.75mm
DS Flange-to-Center16.75mm
Hole Diameter2.7mm
Axle
BodyCNC Machined Al-6061
This was our main hub from 2010-2012 and performed very well (see the reviews). I'm still riding on mine, built up in the fall of 2010 - several thousand problem-free miles. We have just a few left.

Shimano 9/10 Only




ColorsBlack, Red, Silver, Gray, Blue, White, Green, Pink, and Gold
Drillings20, 24, 28, 32, 16:8 and 18:9

Weight210g
Length130mm
Bearings4 sealed Enduro or TPI bearings (2 x 6802, 2 x 6902)
Pawls6
Driveside PCD49.6mm
Non-Driveside PCD38mm
NDS Flange-to-Center37.3mm
DS Flange-to-Center17.1mm
Hole Diameter2.6mm
AxleAl-7075
BodyCNC Machined Al-6061

Shimano 8/9/10: $78.95 Black and Silver, $79.95 Other Colors
Shimano 10/11: $83.95 Black and Silver, $84.95 Other Colors
Campy 10/11: $83.95 Black and Silver, $84.95 Other Colors

Add $10.00 for 16:8 or 18:9 drilling. In the 16:8 design, you raise the 50% tension on the left side to 100% by cutting the number of spokes in half. Since you have half as many, each one has to do the work of two and you have 8 spokes on the left that each have the same tension as 16 spokes on the right. So you can tighten both sides to 120-130 kgf and have a wheel that will stay tight and true without any attention.

ColorsBlack, Red, Gray, Silver
Drillings20, 24, 16:8

Weight190g (Shimano 8/9/10 and Shimano 10/11), 193g (Campy 10/11)
Length130mm
BearingsFour sealed Enduro bearings or TPI Bearings
Pawls 6
Driveside PCD49.6mm
Non-Driveside PCD38.5mm
NDS Flange-to-Center37.6mm
DS Flange-to-Center16.9mm
Hole Diamter2.6mm
AxleAl-7075
BodyCNC Machined Al-6061

Shimano 8/9/10: $89.95
Shimano 10/11: $99.95
Campy 10/11: $99.95

Add $10.00 for 16:8 drilling. In the 16:8 design, you raise the 50% tension on the left side to 100% by cutting the number of spokes in half. Since you have half as many, each one has to do the work of two and you have 8 spokes on the left that each have the same tension as 16 spokes on the right. So you can tighten both sides to 120-130 kgf and have a wheel that will stay tight and true without any attention.
UltraLight Carbon Straight Pull Rear Hub - 197g Shimano Ultegra 6800 11sp Rear Hub SL85 / UL190 - 20/24 Ceramic Hubset - 270g - $249.95
Our Price: $99.95
Our Price: $119.95
Our Price: $249.95
This is a beautiful and incredibly light straight pull hub with a carbon wrapped shell. There is nothing else like it on the market. 

ColorsBlack, Red
Drillings24

Weight196g (Shimano), 205g (Campy)
Pawls3


For the matching front hub, see the UltraLight Carbon Straight Pull Front Hub (86 grams).
Shimano Ultegra 6800 11sp Rear Hub

  • High durability, smooth rotation bearings
  • Easy maintenance
  • Digital adjustment system
  • Less QR axial force


Weight 336g
Length 130mm
Non-Driveside (Left) PCD 44
Driveside (Right) PCD 45mm
NDS (Left) Flange-to-Center 38.15mm
DS (Right) Flange-to-Center 37.3mm
Holes 32h and 36h


Price: $119.95
SL85w / UL190 20/24 Ceramic Hubset - 270 grams

We've had a number of requests for hubs with ceramic bearings, mostly in a 20/24 configuration. So, before we start stocking lots of different colors and drillings, we thought we'd offer one of our most popular sets - the SL85w in 20h and the UL190 in 24h - with TPI Ceramic Bearings. TPI is a Taiwanese bearing manufacturer that also makes bearings for DT Swiss and other leading hub brands. They are very high quality and actually cost us quite a bit more than Enduro. We've found them to be very reliable and will over the next year be using them in all of the hubs we carry. This set normally lists for $149.90 with standard bearings. The upgrade to ceramic adds $100.00 to the price. Maybe there's another 270g, ceramic bearing, ultralight hub set out there for $249.95, but we think we've got a pretty good deal here! We are only selling these as a set, so please don't ask us if we can sell them separately.


UL190 Specifications
Weight190g (Shimano 10/11 only)
Length130mm
BearingsFour sealed TPI Ceramic Bearings
Pawls6
Driveside PCD49.6mm
Non-Driveside PCD38.5mm
NDS Flange-to-Center37.6mm
DS Flange-to-Center16.9mm
Hole Diamter2.6mm
AxleAl-7075
BodyCNC Machined Al-6061

SL85 Specifications
Weight85g
Bearings2 sealed Enduro or TPI 6900 bearings
PCD31mm
Center-to-Flange39.375mm
OLD
Flange Diameter39.5mm

Our Price: $229.95